UHD+ 3 x 2 Matrix with PiP

VLML-SDH3X2

Data Sheet

Product Description

This 3 by 2 Matrix is a high performance switch with integrated scaling and multi-windowing technology. It is an ideal solution for monitoring or displaying multiple medical sources such as endoscope, X-Ray system, ultrasonic, Da Vinci Surgical System…etc. simultaneously during operation or diagnosis. Video resolutions (SDI & HDMI) up to 4K@60Hz and LPCM audio up to 7.1 channels and 192kHz are supported on both input and output and this unit is fully compatible with the HDCP 2.x standards.

Any of 3 different HDMI sources may be displayed individually, full screen, or they can be displayed using a variety of multi-window modes including PiP, PoP, Side-by-Side, Auto display with the output being sent to general HDMI display and 3D Smart Glasses. Management of input/window routing, position and sizing can be controlled easily by use of the front panel controls as well as by WebGUI, RS-232, Telnet, options.

Featured Highlights

  • Supports SDI input distance up to 60 meters, HDMI input/output with 18Gbps (600MHz) 4K UHD

  • Seamless switching (no loss of sync to display) when switching sources in 3x2 matrix mode

  • Supports PiP (Picture-in-Picture), PoP, Side-by-Side and Auto display options with independent audio source selection

  • Supports the ability to store a multi-window arrangement as a preset that can be recalled later

  • Each window can have a border with a selectable color

  • EDID management

  • Uploadable and freely positioned graphic logo supp

  • Supports easy adjustment of window size, position and settings in the PiP windowing mode via the WebGUI

  • •

  • Controllable via front panel buttons, WebGUI, Telnet, RS-232

Specifications

TECHNICAL SPECIFICATIONS
Viedo
HDMI Compliance HDMI 2.0 (DVI 1.0)    
HDCP Compliance     2.x    
Input Signal Types     SDI    
Output Signal Type     4K@60 YUV 4:2:0    
CONNECTIONS    
Input Port     1 SDI

1 HDMI (Type-A)

1 DVI-I
Output Port     1 HDMI

1 USB-C    
Control I/O     1 IP Control (RJ-45)

1 Host Control (Micro USB)
Service Port     1 USB (Type-A)

1 RS-232 (3.5mm)    
MECHANICAL SPECIFICATIONS    
Housing Construction     Metal (Steel)    
Device Dimension (W x H x D)     231.5mm×25mm×108mm [Case Only]

231.5mm×25mm×116mm [All Inclusive]    
Weight     671g   
Power Supply     24V/2.7A (Locking)    
Power Consumption     22W  

Product Inquiry Form